Harmonized System Code lookup and finder

Your HS codes determine your compliance, your admissibility, and which supply chain advantages you can capture. See how precision classification can protect your finances and unlock greater strategy.

U.S. Harmonized Tariff Schedule

HS Code 76

Aluminum and articles thereof

CHAPTER 76

aluminum and articles thereof

76-1

Subheading Notes

1. In this chapter the following expressions have the meanings hereby assigned to them:

(a) Aluminum, not alloyed

Metal containing by weight at least 99 percent of aluminum, provided that the content by weight of any other element does not exceed the limit specified in the following table:

TABLE - Other elements
Element	Limiting content percent by weight
Fe + Si (iron plus silicon)	1
Other elements (1), each	0.1 (2)
(1) Other elements are, for example, Cr, Cu, Mg, Mn, Ni, Zn.
(2) Copper is permitted in a proportion greater than 0.1 percent but not more than 0.2 percent, provided that neither the chromium nor manganese content exceeds 0.05 percent.

(b) Aluminum alloys
Metallic substances in which aluminum predominates by weight over each of the other elements, provided that:
- (i) The content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or
- (ii) The total content by weight of such other elements exceeds 1 percent.

2. Notwithstanding the provisions of note 9(c) to section XV, for the purposes of subheading 7616.91 the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.

Additional U.S. Note

1. For the purposes of heading 7608, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes and pipes with attached fittings, suitable for conducting gases or liquids.

Statistical Notes

l. For the purposes of this chapter, the term "aluminum vanadium master alloy" refers to aluminum alloys which contain by weight 20 percent or more of vanadium.
2. For the purposes of this chapter, the term "aluminum can stock" refers to sheets and strip in coils, of alloys of aluminum in which either manganese or magnesium is the predominant alloying element, not painted, over 0.175 mm but not over 0.432 mm in thickness, and over 254 mm in width, comprising "body stock and "lid stock" as specified below:
- (a) The term "body stock" refers to aluminum can stock having manganese as the predominant alloying element and having a minimum tensile strength of 262 MPa; and
- (b) The term "lid stock" refers to aluminum can stock having magnesium as the predominant alloying element and having a minimum tensile strength of 345 MPa.
3. For the purposes of statistical reporting number 7601.20.9080, "sheet ingot" (slabs) refers to aluminum alloys with a rectangular cross-section suitable to be manufactured into other products.
4. For the purposes of statistical reporting number 7601.20.9085, "foundry ingot" refers to large castings of aluminum alloys of various shapes other than sheets or slabs to be melted for further processing.
5. For the purposes of statistical reporting numbers 7604.29.3030, 7604.29.5020 and 7606.12.3015, “high-strength heat-treatable alloys” refers to aluminum containing by weight 7.0 percent or less of copper or 10.0 percent or less of zinc, and/or are designated as series 2xxx or 7xxx (except 7072) in the Aluminum Association’s specifications of registered alloys.
6. For the purposes of statistical reporting numbers 7604.21.0010, 7604.29.1010, 7604.29.3060, 7604.29.5050, 7606.12.3025 and 7606.12.3091, “heat-treatable industrial alloys” refers to aluminum containing by weight 3.0 percent or less of magnesium and 3.0 percent or less of silicon, and/or are designated as series 6xxx in the Aluminum Association’s specifications of registered alloys.

Don't understand?

Check out our product classification page.

U.S. Tariff Rates

U.S. tariff rates for HS Code 76: Aluminum and articles thereof
Heading / Subheading	Article Description	Unit of Quantity	General	Special
7601	Unwrought aluminum:
7601.10	Aluminum, not alloyed
7601.10.30.00	Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	kg	2.6%	Free (, S,)
Calculate duties for this HTS code
7601.10.60	Other		Free
7601.10.60.40	Of 99.9 percent aluminum or greater	kg
Calculate duties for this HTS code
7601.10.60.45	Of greater than 99.8 percent but less than 99.9 percent	kg
Calculate duties for this HTS code
7601.10.60.90	Other	kg
Calculate duties for this HTS code
7601.20	Aluminum alloys
7601.20.30.00	Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	kg	2.6%	Free (, S,)
Calculate duties for this HTS code
	Other
7601.20.60.00	Containing 25 percent or more by weight of silicon	kg	2.1%	Free (, S,)
Calculate duties for this HTS code
7601.20.90	Other		Free
7601.20.90.30	Aluminum vanadium master alloy	kg
Calculate duties for this HTS code
	Other
7601.20.90.45	Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils	kg
Calculate duties for this HTS code
7601.20.90.60	Other, containing 0.03 percent or more by weight of lead (secondary aluminum)	kg
Calculate duties for this HTS code
	Other
7601.20.90.75	Remelt scrap ingot	kg
Calculate duties for this HTS code
7601.20.90.80	Sheet ingot (slab) of a kind described in statistical note 3 to this chapter	kg
Calculate duties for this HTS code
7601.20.90.85	Foundry ingot of a kind described in statistical note 4 to this chapter	kg
Calculate duties for this HTS code
7601.20.90.95	Other	kg
Calculate duties for this HTS code
7602.00.00	Aluminum waste and scrap		Free
7602.00.00.35	Recyclable used beverage containers	kg
Calculate duties for this HTS code
7602.00.00.45	Recyclable aluminum auto and truck wheels	kg
Calculate duties for this HTS code
7602.00.00.55	Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips	kg
Calculate duties for this HTS code
7602.00.00.65	Other recyclable aluminum	kg
Calculate duties for this HTS code
7602.00.00.75	Other	kg
Calculate duties for this HTS code
7603	Aluminum powders and flakes
7603.10.00.00	Powders of non-lamellar structure	kg	5%	Free (,S,)
Calculate duties for this HTS code
7603.20.00.00	Powders of lamellar structure; flakes	kg	3.9%	Free (,S,)
Calculate duties for this HTS code
7604	Aluminum bars, rods and profiles
7604.10	Of aluminum, not alloyed
7604.10.10.00	Profiles	kg	5%	Free (,S,)
Calculate duties for this HTS code
	Bars and rods
7604.10.30.00	Having a round cross section	kg	2.6%	Free (,S,)
Calculate duties for this HTS code
7604.10.50.00	Other	kg	3%	Free (,S,)
Calculate duties for this HTS code
	Of aluminum alloys
7604.21.00	Hollow profiles		1.5%	Free (, S,)
7604.21.00.10	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7604.21.00.90	Other	kg
Calculate duties for this HTS code
7604.29	Other
7604.29.10	Other profiles		5%	Free (*,S,)
7604.29.10.10	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7604.29.10.90	Other	kg
Calculate duties for this HTS code
	Bars and rods
7604.29.30	Having a round cross section		2.6%	Free (*,S,)
7604.29.30.30	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	kg
Calculate duties for this HTS code
7604.29.30.60	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7604.29.30.90	Other	kg
Calculate duties for this HTS code
7604.29.50	Other		3%	Free (*,S,)
7604.29.50.20	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	kg
Calculate duties for this HTS code
7604.29.50.50	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7604.29.50.90	Other	kg
Calculate duties for this HTS code
7605	Aluminum wire
	Of aluminum, not alloyed
7605.11.00.00	Of which the maximum cross-sectional dimension exceeds 7 mm	kg	2.6%	Free (,S,)
Calculate duties for this HTS code
7605.19.00.00	Other	kg	4.2%	Free (,S,)
Calculate duties for this HTS code
	Of aluminum alloys
7605.21.00.00	Of which the maximum cross-sectional dimension exceeds 7 mm	kg	2.6%	Free (,S,)
Calculate duties for this HTS code
7605.29.00.00	Other	kg	4.2%	Free (*,S,)
Calculate duties for this HTS code
7606	Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm
	Rectangular (including square)
7606.11	Of aluminum, not alloyed
7606.11.30	Not clad		3%	Free (,S,)
7606.11.30.30	With a thickness of more than 6.3 mm	kg
Calculate duties for this HTS code
7606.11.30.60	With a thickness of 6.3 mm or less	kg
Calculate duties for this HTS code
7606.11.60.00	Clad	kg	2.7%	Free (,S,)
Calculate duties for this HTS code
7606.12	Of aluminum alloys
7606.12.30	Not clad		3%	Free (*,S,)
	With a thickness of more than 6.3 mm
7606.12.30.15	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	kg
Calculate duties for this HTS code
7606.12.30.25	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7606.12.30.35	Other	kg
Calculate duties for this HTS code
	With a thickness of 6.3 mm or less
	Aluminum can stock
7606.12.30.45	Body stock	kg
Calculate duties for this HTS code
7606.12.30.55	Lid stock	kg
Calculate duties for this HTS code
	Other
7606.12.30.91	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	kg
Calculate duties for this HTS code
7606.12.30.96	Other	kg
Calculate duties for this HTS code
7606.12.60.00	Clad	kg	6.5%	Free (*,S,)
Calculate duties for this HTS code
	Other
7606.91	Of aluminum, not alloyed
7606.91.30	Not clad		3%	Free (,S,)
7606.91.30.55	With a thickness of more than 6.3 mm	kg
Calculate duties for this HTS code
7606.91.30.95	With a thickness of 6.3 mm or less	kg
Calculate duties for this HTS code
7606.91.60	Clad		2.7%	Free (,S,)
7606.91.60.55	With a thickness of more than 6.3 mm	kg
Calculate duties for this HTS code
7606.91.60.95	With a thickness of 6.3 mm or less	kg
Calculate duties for this HTS code
7606.92	Of aluminum alloys
7606.92.30	Not clad		3%	Free (,S,)
7606.92.30.25	With a thickness of more than 6.3 mm	kg
Calculate duties for this HTS code
7606.92.30.35	With a thickness of 6.3 mm or less	kg
Calculate duties for this HTS code
7606.92.60	Clad		6.5%	Free (,S,)
7606.92.60.55	With a thickness of more than 6.3 mm	kg
Calculate duties for this HTS code
7606.92.60.95	With a thickness of 6.3 mm or less	kg
Calculate duties for this HTS code
7607	Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm
	Not backed
7607.11	Rolled but not further worked
	Of a thickness not exceeding 0.15 mm:
7607.11.30.00	Of a thickness not exceeding 0.01 mm	kg	5.8%	Free (*,S,)
Calculate duties for this HTS code
7607.11.60	Of a thickness exceeding 0.01 mm		5.3%	Free (*,S,)
7607.11.60.10	Boxed aluminum foil weighing not more than 11.3 kg	kg, m<sup>2</sup>
Calculate duties for this HTS code
7607.11.60.90	Other	kg, m<sup>2</sup>
Calculate duties for this HTS code
7607.11.90	Other		3%	Free (*,S,)
	Aluminum can stock
7607.11.90.30	Body stock	kg
Calculate duties for this HTS code
7607.11.90.60	Lid stock	kg
Calculate duties for this HTS code
7607.11.90.90	Other	kg
Calculate duties for this HTS code
7607.19	Other
7607.19.10.00	Etched capacitor foil	kg	5.3%	Free (,S,)
Calculate duties for this HTS code
	Other
7607.19.30.00	Cut to shape, of a thickness not exceeding 0.15 mm	kg	5.7%	Free (,S,)
Calculate duties for this HTS code
7607.19.60.00	Other	kg	3%	Free (,S,)
Calculate duties for this HTS code
7607.20	Backed
7607.20.10.00	Covered or decorated with a character, design, fancy effect or pattern	kg	3.7%	Free (,S,)
Calculate duties for this HTS code
7607.20.50.00	Other	kg	Free
Calculate duties for this HTS code
7608	Aluminum tubes and pipes
7608.10.00	Of aluminum, not alloyed		5.7%	Free (,S,)
7608.10.00.30	Seamless	kg
Calculate duties for this HTS code
7608.10.00.90	Other	kg
Calculate duties for this HTS code
7608.20.00	Of aluminum alloys		5.7%	Free (,S,)
7608.20.00.30	Seamless	kg
Calculate duties for this HTS code
7608.20.00.90	Other	kg
Calculate duties for this HTS code
7609.00.00.00	Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)	kg	5.7%	Free (,S,)
Calculate duties for this HTS code
7610	Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures
7610.10.00	Doors, windows and their frames and thresholds for doors		5.7%	Free (,S,)
7610.10.00.10	Windows and their frames	kg
Calculate duties for this HTS code
7610.10.00.20	Thresholds for doors	kg
Calculate duties for this HTS code
7610.10.00.30	Other	kg
Calculate duties for this HTS code
7610.90.00	Other		5.7%	Free (*,S,)
7610.90.00.20	Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment	kg
Calculate duties for this HTS code
7610.90.00.40	Architectural and ornamental work	kg
Calculate duties for this HTS code
	Other
7610.90.00.60	Mobile homes	kg
Calculate duties for this HTS code
7610.90.00.80	Other	kg
Calculate duties for this HTS code
7611.00.00	Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment		2.6%	Free (,S,)
7611.00.00.30	Tanks	No.
Calculate duties for this HTS code
7611.00.00.90	Other	No.
Calculate duties for this HTS code
7612	Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
7612.10.00.00	Collapsible tubular containers	No.	2.4%	Free (,S,)
Calculate duties for this HTS code
7612.90	Other
7612.90.10	Of a capacity not exceeding 20 liters		5.7%	Free (*,S,)
	Cans of a capacity not exceeding 355 ml
7612.90.10.40	With a circular cross section, of a kind used for aerosols	No.
Calculate duties for this HTS code
7612.90.10.45	Other	No.
Calculate duties for this HTS code
7612.90.10.60	Cans of a capacity exceeding 355 ml but less than 3.8 liters	No.
Calculate duties for this HTS code
7612.90.10.90	Other	No.
Calculate duties for this HTS code
7612.90.50.00	Other	No.	Free
Calculate duties for this HTS code
7613.00.00.00	Aluminum containers for compressed or liquefied gas	No.	5%	Free (,S,)
Calculate duties for this HTS code
7614	Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated
7614.10	With steel core
7614.10.10.00	Not fitted with fittings and not made up into articles	kg	4.9%	Free (, S,)
Calculate duties for this HTS code
7614.10.50.00	Fitted with fittings or made up into articles	kg	4.9%	Free (*,S,)
Calculate duties for this HTS code
7614.90	Other
	Not fitted with fittings and not made up into articles
7614.90.20	Electrical conductors		4.9%	Free (,S,)
7614.90.20.30	With a cross-sectional area less than 240 mm²	kg
Calculate duties for this HTS code
7614.90.20.60	With a cross-sectional area greater than or equal to 240 mm²	kg
Calculate duties for this HTS code
7614.90.40.00	Other	kg	4.9%	Free (, S,)
Calculate duties for this HTS code
7614.90.50.00	Fitted with fittings or made up into articles	kg	5.7%	Free (,S,)
Calculate duties for this HTS code
7615	Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum
7615.10	Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
7615.10.11.00	Pot scourers and scouring or polishing pads, gloves and the like	kg	3.1%	Free (*,S,)
Calculate duties for this HTS code
	Other
	Cooking and kitchen ware
	Enameled or glazed or containing nonstick interior finishes
7615.10.20	Cast		3.1%	Free (*,S,)
7615.10.20.15	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7615.10.20.25	Other	No., kg
Calculate duties for this HTS code
7615.10.30	Other		3.1%	Free (*,S,)
7615.10.30.15	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7615.10.30.25	Other	No., kg
Calculate duties for this HTS code
	Not enameled or glazed and not containing nonstick interior finishes
7615.10.50	Cast		3.1%	Free (*,S,)
7615.10.50.20	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7615.10.50.40	Other	No., kg
Calculate duties for this HTS code
7615.10.71	Other		3.1%	Free (*,S,)
7615.10.71.25	Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness	No., kg
Calculate duties for this HTS code
	Other cookware
7615.10.71.30	Bakeware (cookware not suitable for stove top use)	No., kg
Calculate duties for this HTS code
7615.10.71.55	Other	No., kg
Calculate duties for this HTS code
7615.10.71.80	Other	No., kg
Calculate duties for this HTS code
7615.10.91.00	Other	kg	3.1%	Free (*,S,)
Calculate duties for this HTS code
7615.20.00.00	Sanitary ware and parts thereof	kg	3.8%	Free (*,S,)
Calculate duties for this HTS code
7616	Other articles of aluminum
7616.10	Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
7616.10.10.00	Nails, tacks and staples	kg	5.7%	Free (,S,)
Calculate duties for this HTS code
7616.10.30.00	Rivets	kg	4.7%	Free (,S,)
Calculate duties for this HTS code
7616.10.50.00	Cotters and cotter pins	kg	5.7%	Free (,S,)
Calculate duties for this HTS code
	Other
7616.10.70	Having shanks, threads or holes over 6 mm in diameter		5.5%	Free (,S,) 2.75% ()
7616.10.70.30	Threaded fasteners	kg
Calculate duties for this HTS code
7616.10.70.90	Other	kg
Calculate duties for this HTS code
7616.10.90	Other		6%	Free (,S,)
7616.10.90.30	Threaded fasteners	kg
Calculate duties for this HTS code
7616.10.90.90	Other	kg
Calculate duties for this HTS code
	Other
7616.91.00.00	Cloth, grill, netting and fencing, of aluminum wire	kg	2.5%	Free (*,S,)
Calculate duties for this HTS code
7616.99	Other
7616.99.10.00	Luggage frames	kg	Free
Calculate duties for this HTS code
7616.99.51	Other		2.5%	Free (*,S,)
7616.99.51.20	Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material	kg
Calculate duties for this HTS code
7616.99.51.30	Ladders	No.
Calculate duties for this HTS code
7616.99.51.40	Venetian blinds and parts thereof	No.
Calculate duties for this HTS code
7616.99.51.50	Hangers and supports for pipes and tubes	kg
Calculate duties for this HTS code
	Other
7616.99.51.60	Castings	kg
Calculate duties for this HTS code
7616.99.51.70	Forgings	kg
Calculate duties for this HTS code
	Other
7616.99.51.75	Articles of wire	kg
Calculate duties for this HTS code
7616.99.51.90	Other	kg
Calculate duties for this HTS code

No results

Harmonized System Code (HS) Lookup & Finder

HS Code 76

U.S. Tariff Rates

Join our newsletter to stay up to date on the latest disruptions, rates, and market shifts.

Harmonized System Code (HS) Lookup & Finder

HS Code 76

U.S. Tariff Rates

Calculate and analyze tariff impacts in real time

You're all set